Case study 4A Warehouse management - PART 5

Rumman Ansari   Software Engineer   2026-03-09 04:06:54   10  Share
Subject Syllabus DetailsSubject Details
☰ TContent
☰Fullscreen

Table of Content:

Exercise #14 Setup manual packing (Bonus)

Objective: Set up manual packing by configuring packing types, packing profiles, and wave templates.

You have been asked to set up manual packing for USP2.

You need to create a container type and packing profile.

You will then link the packing profile to Julia Funderburk.

You will need to do the following:

  • Create container types.

  • Create a packaging profile.

  • Link the profile to a work user.

  • Set up a wave template.

Create container types

  1. Open Warehouse management > Setup > Containers > Container types.

  2. Select New in the action pane.

  3. In the Container type code field, enter PackingBox.

  4. In the Description field, enter PackingBox.

  5. In the Tare weight field, enter 0.5.

  6. In the Maximum net weight field, enter 15.00.

  7. In the Container length field, enter 12.00.

  8. In the Container width field, enter 16.00.

  9. In the Container height field, enter 10.00.

  10. Select Save in the action pane.

Create a packing profile

  1. Open Warehouse management > Setup > Packing > Packing profiles.

  2. Select New to create a new profile.

  3. Type PACK2 in the Packing profile ID field.

  4. Type Packing station 2 in the Description field.

  5. Select Number 1 in the Container packing policy field, or create it.

  6. Select Auto in the Container ID mode field.

  7. In the Container type field, select PackingBox.

  8. Select the Autocreate container at container close check box.

  9. Select Save in the action pane.

  1. Open Warehouse management > Setup > Worker.

  2. Select Julia Funderburk from the left-hand pane.

  3. Select Edit in the action pane.

  4. Update the Packing profile ID field to PACK2.

  5. Select Save in the action pane.

Set up a wave template

  1. Go to Warehouse management > Setup > Waves > Wave templates.

  2. Select New.

  3. In the Wave template name field, enter a value.

  4. In the Wave template description field, enter a value.

  5. In the Site field, enter or select a value.

  6. In the Warehouse field, enter or select a value.

  7. Select Save.

  8. Expand the Methods section. The Selected methods pane lists the methods for the selected wave template type. The wave template must include the containerize method.

  9. In the list, find and select the desired record.

  10. In the Wave step code field, enter a value. Enter a Wave step code for the added method, which can be any code. It’s possible to add the method more than once and assign different wave step codes. To do this, select Repeatable for this method in the Wave process methods page.

  11. Select Save.

  12. Close the page.

 

Congratulations!

You have successfully completed this Lab. Click Next to advance to the next Lab.